Seven Points to Perfect Printing

I hate struggling with output. It is hard enough in this economy just keeping ourselves above water. Often we are working in more streamlined environments and wearing many hats in order to stay profitable. The last thing we need to do is struggle with our sign making equipment to make a decent sign or banner. Wouldn’t it be great to get consistent, predictable and high quality output from our large format printers each and every time we hit the print button? Well, the following points are designed to help you achieve and maintain a job quality that will make you the envy of your competitors. These points are primarily designed for use with Roland printers, but can be used for many different printers.


Point 1: Wipers.

How many remember what the wipers are?  Wipers are the single greatest asset you have for clean print heads.  Too often we hear complaints of print head “failures” or print quality issues, only to find that the wipers on the printer have never been changed.  Cleaning your print heads with a  wiper that is covered in dried ink, dog hair, and carpet fibers is like cleaning the windshield of your car with a greasy squeegee. Change your wipers early and often.


Point 2: Cleaning solution.

Get yourself a bottle of the appropriate cleaning solution for whatever ink you are using in your printer. Once a week, inspect your print heads and clean them with a foam swab soaked in cleaning solution. You can see ink buildup disappear and your heads return to pristine condition. Please remember never to use a swab to rub the bottoms of your print heads, only the sides where the ink has built up. Let the wipers clean the surface of the head (see above).


Point 3: Scheduled maintenance.

Regular inspection and cleaning of your printer will ensure consistent top notch print quality.  Clean the heads (see above), wipers, and captops (the small assembly that supports the head when it is not active). Wipe any excess ink off the platen and make sure there is nothing impeding the path of the media. I recommend that Roland printers be maintained once a week. So spend 10 minutes a week cleaning your printer.


Point 4: Calibrate.

Each media you use on your printer has unique properties. For example, a 2mil cast vinyl has a different thickness than a 15oz scrim banner material.  The distance from the surface of the head to the surface of the media is different as is the way each media feeds through the printer. So it is critical that you recalibrate your printer for each type of media you use. The two basic calibrations are feed calibration (Calibration on Roland models) and BiDirectional Calibration.  Feed calibration adjusts the distance the media travels through the printer after each print pass and Bidirectional calibration ensures that the print heads are placing dots in the exact same spot in both travel directions of the head carriage.


Point 5: Presets.

A little known feature on Roland printers is the ability to set default characteristics for each media you use in the form of Presets.  So for each media you use, you can calibrate your printer for that media’s specific characteristics, then save those calibration settings as a Preset. Then the next time you switch to that media, you need only load that Preset and the printer will adjust its calibration settings to that media. Newer Roland printers will even allow you to name the Presets for easy identification (Banner, Cast, Clear, etc). This can be a great time saver and allows less experienced users to operate the printer without having to rerun calibrations.


Point 6: Ink.

Use OEM inks! I know that in this tough economy the temptation is strong to save money wherever possible. Ink is not the place to economize! Regardless of what the manufacturers tell you, 3rd party inks will change the color output of your prints, which will force you to find or create new profiles. Issues like density, dry times and potential damage to sensitive components of your printer (print heads cost as much as $2,500 to replace) will ultimately affect your ability to create consistent prints and may end up being much more expensive than the savings you realize by purchasing these inks over the manufacturer brand inks.


Point 7: Dealer.

Develop a strong relationship with your dealer. If you don’t have a dealer or know who your dealer is, you can find them through Dealer Locater functions on manufacturer’s web sites like www.rolanddga.com. Building a good relationship with your dealer will provide you with a valuable resource for sourcing out new media, answering technical questions about your software/hardware, and repairing your printer should that become necessary.

ShareThis

Comments

206 Responses to “Seven Points to Perfect Printing”

  1. flying tiger on August 11th, 2011 10:46 am

    hi there we having a problem with calibration we got roland versacamm sp-540v the problem i am having ryt now its. the media its self its not moving out of the place but the machine its not printing straight on the media and i have tried to set the calibration but still its not coming straight.. so i dont know hot to get the print nice and crisp pls if u can help me out wid my solution?? thanx

  2. Dede Sabey on August 11th, 2011 5:21 pm

    Hello Flying Tiger! The folks in the TelPro office in South Africa will be calling you shortly. They can fix your calibration issue in a snap! Here is their number: 27 11 466 1551 http://www.rolanddg.co.za

    Dede

  3. Tabitha on December 3rd, 2011 2:14 am

    I wish I had read this 6 months ago. I purchased a 3rd party ink to save money and the colors were okay, BUT the dry time was RIDICULOUS I had to spend $500 to repair my print heads because the 20/20 ink dried up my print heads after being out of town for a week. I have left my roland ink in there for months and after a few cleaning cycles it was good as new! Beware other owners, take it from my experience cheaper ink…NOT worth it.

  4. Dede Sabey on December 5th, 2011 4:47 pm

    Thanks for your note Tabitha! We hear this a lot from users. Glad your unit is “good as new” again!

  5. Mark Watkins on January 30th, 2012 4:28 pm

    How do you access the cap tops on a Versa Camm 540P to clean them?

  6. Dede Sabey on January 30th, 2012 7:36 pm

    Hi Mark,
    Thanks for asking! I’m glad you’re diligent about cleaning your captops. There is a handy flash video that will walk you through the process along with all other required maintenance. http://rolanddga.com/owners/support/printerMaintenance/.

    Dede

  7. Lauren Olsen on March 6th, 2012 5:24 pm

    Hi,

    When printing, my colours in the prints are coming out spotty. How do you fix, and avoid this for future reference?

  8. Dede Sabey on March 6th, 2012 8:00 pm

    Hi Lauren,
    Thank you for reading our tips and tricks blog. Can you be more specific regarding what you mean by “colours are coming out spotty”? Then I can get one of our product experts to pass along some advice.

    Dede

  9. Lauren Olsen on March 6th, 2012 11:50 pm

    Hi Dede,

    I mean as in uneven, the colour isn’t solid.

  10. Louise on March 13th, 2012 5:00 pm

    Hi,
    I am having trouble with color matching. I just can’t seem to match PMS Cool Gray 10 for the life of me, it comes out reddish or brownish. And another customer complained that their rendering is has too much magenta in the grays. There seems to be a connection- any thoughts?
    Thanks, Louise

  11. Dede Sabey on March 14th, 2012 4:12 pm

    Hi Lauren,
    There could be many variables contributing to this problem. Here are a few suggestions:

    1) Make sure the media is profiled correctly
    2) If the printer head height is adjustable, please adjust it according to your media.
    3) If printing bi-directional, make sure a ‘detailed’ bi-direction calibration is performed on the media.
    4) Check the printer’s nozzle – make sure all nozzles are firing.

    For additional assistance, please call our Tech. Support, they will glad to assist you with your issue. 800-542-2307

  12. Dede Sabey on March 14th, 2012 4:36 pm

    Hi Louise,
    You’re not alone! In general, ‘PMS Gray’ is difficult to match with any CMYK printer. We strongly recommend to profile the media that you are using correctly (including balancing the neutral gray with CMYK). This will eliminate the color ‘tints’ in the grays.

    Dede

  13. Anthony on April 11th, 2012 12:25 pm

    Hi

    I own an SP540i which is relatively new. a few months ago, the black & cyan started printing very grainy even after several cleanings. Any colors which include either the black or cyan also comes out grainy and the edges of letters, graphics etc are not shape at all. The print test shows a number of gaps in the black but does not show that many in the cyan. The yellow and magenta are fine.

    A get very disappointing print jobs, please advise.

    Thanks

  14. Dede Sabey on April 12th, 2012 11:31 pm

    Hi Anthony,
    What you’re experiencing is an ink delivery/head firing problem on the printer. It’s recommended to perform the typical cleaning routine on the printer. We’ve published a guide that will help you with this process. Go here to view the guide: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_TestPrint_Rev_1.pdf

    In the event the problem persists, it’s recommended to have your dealer inspect your printer and make any necessary repairs. You can find a dealer by using our dealer locator here: http://www.rolanddga.com/dealers/

    Thanks!

  15. Mary Oakes on April 28th, 2012 8:48 pm

    I Own a Roland Metaza MPX 60. Sometimes Printer will print then Won’t Print . Acts like it is printing but no image. Can you please help me?
    do not know what to do so I can start using my printer.
    Thanks!!

  16. Dede Sabey on May 4th, 2012 10:48 pm

    Hi Mary,
    I understand you’re already in touch with our Tech Support department about a fix. Let us know if you need anything further.

    Dede

  17. Linda on May 26th, 2012 7:51 pm

    I have a 300 VP. The cyan has stopped printing. The printer has been cleaned on a regular basis. The tube is not plugged. All other colors are fine. In cdr I even made a cyan circle. The color is totally gone. By the way all of the ink cart. are new as well as the caps.

  18. Dede Sabey on May 29th, 2012 3:02 pm

    Linda,
    Please contact your local dealer to have them troubleshoot the issue.

    Thanks,
    Dede

  19. Linda on May 29th, 2012 7:25 pm

    Thanks. I did more troubleshooting. It was a cap top issue.

    Thanks.

  20. Dede Sabey on May 29th, 2012 7:39 pm

    Excellent. I’m glad you figured it out!

  21. Eid on June 17th, 2012 4:09 pm

    hey, Dede
    i have a 540 of which lately it started printing with two constant lines in any colored image, and after the image starts getting off the media. thanks

  22. Dede Sabey on June 18th, 2012 3:04 pm

    Hi Eid. For issues like these, its best to call your dealer directly or contact our tech support department: 800-542-2307. I asked our Tech Support about your issues and they said it sounds like you have a dirty or damaged linear encoder. To fix it, call your dealer or the tech support department.

    Dede

  23. Scott on June 18th, 2012 3:09 pm

    Hello Eid:

    Dede is correct that you should contact your dealer technician. Another likely cause for this issue is a damaged or loose cable to one of the print heads – particularly if the lines you mention are wide bands of a particular color. Working with cables can be a bit tricky and incorrect handling of them could cause more serious damage to the printer. The good news is, if this is the case (bad cable), it is a relatively inexpensive fix.
    Cheers,
    Scott

  24. Eid on June 21st, 2012 5:10 pm

    thanks guys let me try my dealer.
    im in south Sudan and he is Egypt

  25. Sid on June 28th, 2012 12:59 pm

    Where can I get the best settings for glossy vinyl? I’m using an SP-540i.

  26. Dede Sabey on June 29th, 2012 10:39 pm

    Hi Sid,
    The SP-540i printer uses the Roland VersaWorks RIP software. The embedded “glossy vinyl” profile is already optimized with a combination of settings to produce the best print quality. Simply select the profile that matches your material, and you’ll be fine. If you need to discuss this topic further, please call into Roland America technical support at 800-542-2307.

    Dede

  27. Jake on July 18th, 2012 3:21 pm

    I’m fairly new to the printing industry & recently acquired a Roland XC-540. I’m having problems with the print/cut feature where most of the time the cuts are way off. I print lots of small labels with logos/text that require to be centered but most of the time they come out way to the left. Is there something I can do to fix this.

  28. Don Spann on July 28th, 2012 5:02 am

    The media came off the rollers in the back of my sp54ov jamed up and the error message said to shut thi machine down. I did this, fixed the jam, turned the power sourse back on but the machine started to go through the processing mode on the readout then the 4 ink indicators started going off and on and it started beeping. What is this and how do I remedy the situation?

  29. Dede Sabey on July 30th, 2012 8:22 pm

    Hi Don,
    I saw that Scott sent you a detailed email today in response to your comment. If you’re still having trouble, please call our Technical Support line at 800-542-2307 >> Press Option 1 and they can provide further assistance or direct you to a technician who can look at the printer.

    Thanks for reading our blog!

    Dede

  30. Dede Sabey on August 6th, 2012 2:13 pm

    Hello Jake,

    Roland technical support has published a print and cut calibration guide that addresses your issue specifically. You can view that document online here: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_PrintCut.pdf

    If you continue to experience print and cut accuracy issues, please call into Roland technical support at 800-542-2307 to speak with a technician, or email tech support by completing our online form here.

    Thanks for you being part of the Roland family

  31. David on August 8th, 2012 10:11 pm

    I work in the world of PMS colors. I have a VersaCamm 300 spi. I had no problem matching colors with my PMS color chart. But I started to have problems lately with the colors not matching. Any ideas?

    Thans

  32. Dede Sabey on August 10th, 2012 8:16 pm

    Hi David,
    Our technical support department recommends that you try printing a test print from the printer to assure that all nozzles are firing. Nozzles not firing correctly will cause colors not to print in the correct color. You can find instructions on doing a test print in this Printer Maintenance video http://www.youtube.com/watch?v=bej_mmHeDgQ&feature=youtu.be&hd=1. Another video that might be helpful is the Principles of Color management http://www.youtube.com/watch?v=DiIJGil6gz8&feature=youtu.be&hd=1.

    If you continue to experience color management issues, please call into Roland technical support at 800-542-2307 to speak with a technician, or email tech support by completing our online form here.

    Thanks for you being part of the Roland family.

    Dede

  33. Jeremy on August 18th, 2012 11:23 am

    Hi,
    I have Roland soljet pro 2 SC-540 the problem is when I printing there is unnecessary lines in my print its like a 4 lines in one area. I think there is a problem with my heads, what do you think should I to this.

    Thanks

  34. Dede Sabey on August 20th, 2012 5:43 pm

    Hi Jeremy,
    Sorry to hear you’re having trouble. It may not be an issue with your print head. We recommend contacting either our Tech Support Dept. (1-800-542-2307 Ext. 1) or your local dealer to go over some tests to determine cause of the issue. Agents standing by.

    Dede

  35. Mike on August 29th, 2012 9:50 pm

    As of late when I print anything large (4×8 or larger, once the print is done, the final product us almost .25 shorter than intended. Printed a 2×6 banner this afternoon and it was also .25 short. I have checked all of the feed calibrations and other settings. This is something that has started happening on my VP-540 here lately. Cleaned the rollers and everything. Going to try another 2′x8′ in the morning to see if it still prints short. Checked the size in Flexi and VersaWorks and is set for 8′ exactly. Thanks for any insite you might have..Bash

  36. Dede Sabey on September 5th, 2012 2:52 pm

    Hello Mike,
    Based on the information provided, we suspect the software feed calibration settings are overriding the hardware calibration values on the machine. In VersaWorks, double-click on the job to open “Job Settings”, select “Printer Controls”, and ensure the Feed Calibration Controls are set to “Use Printer Settings”. If the problem persists, please contact Roland technical support directly. Call 800-542-2307, or submit an email request here: http://www.rolanddga.com/owners/support/email/.

    Thanks,
    Dede

  37. Sherry on September 5th, 2012 7:27 pm

    Hi

    I have a Roland SP540V. I have had problems in the past with a magenta overspray. I have had the print heads replaced this year. The problem has returned and I am being told I have to replace the head AGAIN! Is there anything I can do? I have also done a test print and it shows I have missing nozzles in the black. I do not want to tell the owner we need new print heads.

    HELP!

    Thanks,
    Sherry

  38. Dede Sabey on September 5th, 2012 10:44 pm

    Hello Sherry,
    Overspray can be caused by a few things. Static can be causing this issue and you can follow this document to troubleshoot for static http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Static%20Suppression%20for%20Roland%20Printers.pdf

    Also, a dirty encoder can be a cause of overspray. Clean the linear encoder on your printer to see if it solves the problem.

    Other than those two suggestions unfortunately the most comon cause of overspray is a bad print head. If the dealer has been on site and had inspected the printer, I would go with what they have diagnosed. If you’d like more feedback from us, the best way to get it is to call Roland technical support directly 800-542-2307.

    Thanks,
    Dede

  39. mark anthony on October 8th, 2012 7:31 am

    hi i am just wondering how you adjust you head height on a roland XC-540? i have media that is aluminium backed and is approx 2mm thick and dont wont to damage the head….thank-you Mark….

  40. Dede Sabey on October 8th, 2012 3:51 pm

    Hi Mark,
    To adjust the head height there is a lever on the left hand side of the head carriage. Raise the lever for the high head height setting and lower the lever for low head height. As a reminder the suitable thickness of media that can be ran by our XC-540 is 1.0 MM anything thicker may cause head strikes. Hope that helps.

    Dede

  41. vee on October 9th, 2012 4:04 pm

    is there any videos on how to use syringe to draw ink form the caps on a roland vp540 to see if clogged.

    also is their any videos on how to change the caps
    on a roland vp-540
    my vp-540 will not print the magenta/yellow. I have cleaned many times. Not showing on my test print

  42. Victor on October 10th, 2012 8:22 pm

    I have a SP540v, the Black is giving an over-spray
    effect in the print with a burred edge (horizontally only). When I print 100% black I now get a charcoal gray. When I calibrate the heads all was good except the BI-DIRECTION ADJUSTMENT test pattern. the black/cyan was almost off the scale(in the high 30′s). The head was installed about a year ago with these settings being in the low single digits. I totally re-calibrated the heads, cleaned the encoder strip, new dampers with caps, environmental match, cleaned all of the sensors, checked grounding and threatened it with the scrap yard with the same results.

  43. Dede Sabey on October 11th, 2012 4:42 am

    Hello Vee,
    Replacing cap tops and syringing ink are not considered a user level repair/maintenance for the printer. Therefore, documentation or video demonstrations do not exist. It’s strongly recommended to call your dealer to arrange a service visit. If you don’t have a dealer that you normally work with, you can find one using our dealer locator here: http://www.rolanddga.com/dealers/.

    Dede

  44. Dede Sabey on October 11th, 2012 4:43 am

    Hello Victor,
    For the problem you described it sounds like you would need a certified Roland Technician on site to determine your issue. You can search for a dealer on our dealer locator http://www.rolanddga.com/dealers.

    Thanks,
    Dede

  45. habib on October 11th, 2012 5:24 am

    I have a roland AJ1000 and I have calibration problem. When I print with Bidirectionnal Ther are lines on the pictures. When I print with unidirectionnal it’s better but the print is not very good.

    Thank you.

  46. Dede Sabey on October 11th, 2012 4:37 pm

    Hello Habib,
    We have some documents that may help you in determining what your issue may be. Please take a look at these and see if they help your issue http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_BiDirAdjustment_Rev_1.pdf
    http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_TestPrint_Rev_1.pdf

    If they do not help please contact the company you purchased the printer from. If you do not know who you purchased the printer from contact the local Roland affiliate http://www.rolanddga.com/company/InternationalPartners.asp.

    Thanks,
    Dede

  47. Steve Brear on October 14th, 2012 9:44 am

    The very very best choice we ever made was installing our precious 540i a magnificent machine we have not experienced any problems at all in the two years it has made us money and a lot of very happy military clients i know problems may arise but after owning several totally inferior printers what a pleasure to own the very best roses to Roland

  48. Dede Sabey on October 14th, 2012 11:21 pm

    Wow! What a compliment. Thank you for writing Steve!

    Dede

  49. Kevin Jones on October 16th, 2012 1:17 am

    Hi i have a color changing problem. I printed a black and red image just fine the first time then the second one had changed the red to orange and the black to dark green a quarter of the way through the print job. i tried to peprint but still was coming out orange and green any ideas what would cause this behavior

  50. Dede Sabey on October 16th, 2012 6:13 pm

    Hi Kevin,
    Based on the description provided, the problem is likely an ink delivery issue with the printer. You can restore normal ink flow by performing the typical cleanings on the printer (e.g. medium cleaning, manual cleaning, powerful cleaning). However, if the problem persists, it’s highly possible that the printer is in need of service maintenance. Please call your dealer to arrange an evaluation visit. If you don’t have a dealer that you normally work with, you can find one using our locator utility here: http://www.rolanddga.com/dealers/.

    Dede

  51. Andreas Conides on October 24th, 2012 12:03 pm

    Dear Sir

    We are a printing company in Cyprus and I would like to explain our problem.

    The machine with the problem is a Roland 500.

    The second tower has a problem with the leading edge clam. it seems that it is loose.

    Even though it opens and closes, it does not stay closed therefore we can operate the machine.

    We have the inks in the cylinders and we need to know what can we do so we can at least clean the inks.

    Can you let us know what needs to be done and if you can service us urgently.

    Mob: ++35799698731

  52. J.T. on October 24th, 2012 8:56 pm

    (We use the SP540i and Versaworks RIP)
    I have been printing out small decals, say on average 4” square. We have been using the Middle quality “Standard” print setting, not high-speed or high-quality. I notice a lot of graininess in those decals, and when they are a smaller size like that – it plays more of a role than a bigger or less detailed image.

    I have a decal before me that was done in all vector in Flexi. Inside the letters, there is a solid color (no fill/effects). When I look at what has printed, you can see a variety of light and dark specs – almost like if you took the image into Photoshop and added Grain or Noise.

    Given there has been no reduction in quality coming vector straight from Flexi, my curiosity is causing me to wonder if there is something in the RIP settings (if there ARE settings) that might cause noise to occur in the print. Or, is it simply the way of the world with the solvent ink printer and the vinyl materials we use? Is that standard? Coming from a background of photo and inkjet printers, I know that color would be solid and smooth.

    Thank you for your time!

  53. Dede Sabey on October 26th, 2012 12:16 am

    Hi Andreas,
    It sounds like perhaps you have a MAN Roland press and not a Roland DG wide-format inkjet. If that’s the case, then you’ll need to contact MAN Roland (they are a completely different company). http://www.manroland.com/

    If indeed it is a Roland DG wide-format inkjet, then we recommend you contact your local distributor:

    ATLAS DIGITAL S.A.
    Alimos, Athens, Greece
    TEL +30 210 9845771
    FAX +30 210 9845081
    http://www.atlasdigital.gr/

    Thanks,
    Dede

  54. Dede Sabey on October 26th, 2012 12:29 am

    Hi JT,
    We can definitely help you, but it’d be best to talk it through with you on the phone. Our Tech Support Department would like to as you a few follow-up questions in order to diagnose the issue correctly. Please call a Tech Support Rep at 800-542-2307.

    Thank you,
    Dede

  55. Michael on November 5th, 2012 10:59 pm

    I am printning 6 panels for a pop-up wall. The panels are 80×230 cm. They come out in different lenght, up to 8mm from the shortest to the longest. As there are graphics that shall fit together it is a huge problem.
    I printet 6 panels from a new roll, and they came out each in different length, and some of them were skew.
    Then i tried to print without using the take-up system, to see if that made a difference
    I printet from an nearly empty roll and 2 came out fine (same lenght), then i changed to a new roll and the next 2 panels came out 8mm shorter
    I am using Sihl 3608 durasol
    Printer is XJ 640 Pro III with dryer unit
    How to solve that

  56. Bobby on November 6th, 2012 6:13 pm

    Hi,
    I have a Roland SP-540V that doesn’t like to finish
    cutting sometimes. The cutting simply stops and the screen stays in the “now processing” mode, and I haven’t been able to get it to continue without canceling the whole job and starting again. Any ideas how to solve this?

    thanks

  57. Dede Sabey on November 6th, 2012 10:46 pm

    Hello Bobby,
    Based on the description provided, the issue is a network misconfiguration and it’s recommended to double check the setup by following our troubleshooting video here: http://www.youtube.com/v/bp_sy782z2k&hd=1&autoplay=1. We suspect that will resolve matter, but if not, please contact Roland Technical Support to discuss this further. Call 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Thanks,
    Dede

  58. Dede Sabey on November 6th, 2012 10:47 pm

    Hi Michael,
    Based on the description, the problem is likely a feed calibration misalignment. For troubleshooting purposes, do not use the take-up and give the material slack by spooling it off of the roll (do not allow the feed motor to tug directly off the roll). After positioning the material this way, perform the feed calibration on the printer and try the prints again. We suspect that will resolve the issue, but if not, please contact Roland Technical Support to discuss this further. Call 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/

    Thanks,
    Dede

  59. Cody Aj on November 9th, 2012 10:33 pm

    I am having issues when it comes to print/cuts on our SP 540V as well, but ours will print and cut very nice, but then the media begins to curl. This is something new that’s started and I’ve always just printed and cut right away. The media manufacturer says I must wait at least 4 hours between printing and cutting. Is that true?

  60. Roland xc 540 on November 13th, 2012 6:43 am

    Hey is there anyway to use my roland xc 540 to cut a glass etch roll e.g i wont to turn my 1220mm roll into two rolls, One 1000mm and one 220mm? It doesnt matter if takes time to cut but can it be done??

  61. Dede Sabey on November 15th, 2012 6:48 pm

    Hello Cody,
    Since we don’t know exactly what media you’re using, it’s difficult to comment specifically, however, we can give you some general rules about vinyl media. Some calendared media will shrink after cutting. If you’re using a calendared media that shrinks AND does not have a strong adhesive (ie. a static cling or a removable adhesive) then curling may also occur because the adhesive is not strong enough to keep it affixed to the liner. In order to avoid the shrinkage and curling, you can try cast vinyl instead which doesn’t have the same tendency to shrink or you can try another type of calendared media since there are some that don’t shrink as much. For example, one of our product managers here has used our Glossy Calendared vinyl (ESM-GCVP) and didn’t experience shrinkage or curling. These factors are completely media dependent and the media manufacturer would have the best recommendations. If you’d like to discuss this further, Roland support is available at 800-542-2307.

    Dede

  62. Dede Sabey on November 15th, 2012 8:36 pm

    Interesting idea, but we do not think it will work for a number of reasons that are a bit too complex for this type of communication. If you’re interested, we’re available to discuss this further. Roland support is available at 800-542-2307.

    Dede

  63. craig g on November 16th, 2012 4:36 am

    Hello,
    I bought my second Roland machine about a week ago. I bought it through our dealer in Trinidad (all graphics supplies). The machine is a roland vs 540. However the print quality is bad to say the least. The dealer has been very helpful in sending technicians over to check it out (2 visits in less than 9 days of having this machine). The problem is the print is very grainy looking and not at all smooth or as solid as my roland sp 540 which is 2 years old. The technicians updated the firmware and checked the profiles and still the same poor quality prints. I’m dissapointed as I paid for this machine in full and in cash and believe in roland and only want roland printers. My customers are complaining and I have actually stopped trying to print on my week old machine. I wish I just bought another sp 540 machine instead but I understand those are no longer being produced by roland. Please advise me. I feel as though I am dissapointed in my machine and the brand. Its really tough especially as my business is small and I’m trying to grow it with roland abd rite media products but this machine that was supposed to help me push out more work is now no better than a dust collector. I just wish the prints were brighter more vibrant,solid and not grainy. Please respond…I really feel desparate,dejected and foolish for buying this machine

  64. Dede Sabey on November 16th, 2012 5:44 pm

    Hi Craig,
    I’m so sorry to hear about the trouble. We’d like to call you right away to resolve the issue. Please let us know the best phone number to reach you. I’ll remove it from public viewing as soon as I grab it. Or you can email me your phone number at dsabey@rolanddga.com.

    Thank you,
    Dede

  65. dale on November 17th, 2012 9:59 pm

    sc 500 i know is old but work well kinda lm lc y stop printing half way through any print new heads caping station oring lines dampers etc very lost

  66. ROBERTO RODRIGUES on November 19th, 2012 5:14 pm

    Hola
    tengo un gran problema no puedo imprimir colores grises en roland vp-540

  67. Dede Sabey on November 19th, 2012 11:59 pm

    Hello Dale,
    We would need more information in order to diagnose your problem and suggest a solution. I would suggest that you call your local dealer or our Technical Support department at 800-542-2307 (this number works only from within the United States) or 949-727-2100.

    Dede

  68. dj on November 29th, 2012 1:37 pm

    i have a sc 500 and for the life of me no one can figgure out whats going on , lets say i have a 51″x10″ inch peice of vinyl if i put it in the printer 51″ width and 10″ hight i will get ink drop out 2″ inchs in…BUT if i take the same peice of vinyl and have it 10″ width and 51″ hight i can print all day long ?????

  69. Dede Sabey on November 30th, 2012 4:31 pm

    Hi DJ,
    This is an issue that will be difficult to troubleshoot through comments or email, please contact our Technical Support at 800-542-2307 ext 1. for further assistance.

    Dede

  70. Richard Lint on December 5th, 2012 4:53 pm

    I have a Roland SP-540v when printing small text I get “wind streaks” in the letters.
    Ive tried various settings and presets but nothing seems to work. resolution, speed, heat, uni-bi direction, etc.
    cleaned and maintain regualry
    any suggestions?

  71. Carl C on December 6th, 2012 5:24 pm

    Good evening,

    I have a XC540 that i bought in March 2012. my problem comes and goes. Its not printing a solid colour the best way i can describe is that its wish washy. A Roland engineer came out to look at it and after all his tests he claimed it was down to a rogue substrate. however the problem has come back, surely its not a media fault again. could it be anything on the printer? i know the wipers are in need of changing, would thishelp?
    FYI THe heads get cleaned weekly.

    kind regards, Carl.

  72. Dede Sabey on December 6th, 2012 8:01 pm

    Hi Carl,
    Based on the description provided, it’s possible there’s some interference with the head firing function. Considering you indicated that new wipers are needed, we recommended you replace them. Also, please clean the wiper scraper, perform a main cleaning on the printer, and execute the procedure documented in our support bulletin here: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_TestPrint_Rev_1.pdf. If you have additional questions, please contact Roland Technical Support to discuss this further. Call 800-542-2307 or email us by completing our online form: http://www.rolanddga.com/owners/support/email/.

    Thanks,
    Dede

  73. Dede Sabey on December 6th, 2012 8:06 pm

    Hello Richard,
    Based on the description of “wind streaks” and the troubleshooting history you’ve provided, we suspect the problem is an electro-static issue. We’ve posted a guide that discusses ways to suppress static on wide format printers, including Roland’s brand. You can access that guide here: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Static%20Suppression%20for%20Roland%20Printers.pdf. If you have additional questions, please contact Roland Technical Support to discuss this further. Call 800-542-2307 or email us by completing our online form http://www.rolanddga.com/owners/support/email/.

    Dede

  74. Tom Slaiter on December 7th, 2012 12:16 pm

    Interesting points, pretty much spot on! Good job.

    Thanks for the post :-)

  75. Jeremy on December 11th, 2012 4:46 pm

    Hello! We have a Roland SJ-740 and it has always been a sturdy work-horse for us. Lately, however, I’ve been having some issues with it.

    The most frustrating one at the moment is with the bi-directional settings. When I print small type that is built from multiple colors, the lateral registration is off just enough to annoy me. When I perform a bi-directional test print, the swatches are all pretty much spot-on. However, when I perform a head test print, I see something interesting: On the cyan swatch, the first second pass portion of the swatch prints just a smidge to the left of the first pass portion. All other heads print perfectly aligned on both passes.

    Is there any way to correct this? Thanks!

  76. Dede Sabey on December 11th, 2012 7:39 pm

    Hi Jeremy,
    Based on your description of the problem, it’s likely that the printer’s bi-directional alignment is out of calibration. Please perform the procedure to re-align the nozzles (the process is documented in the printer’s user manual, starting in section 3-6 ‘Making Corrections for Printing’). If you don’t have the manual, you can view it online here: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/SJ-740_640_540_USE_EN_R5.pdf. If the problem continues, it’s recommended to contact an authorized Roland dealer to have the printer physically calibrated. You can access a list of regional dealers by using our locator service here: http://www.rolanddga.com/dealers/.

    Thanks,
    Dede

  77. Toya on December 13th, 2012 2:16 pm

    Sometimes when I save my files as eps files and send it to the roland vs540 it puts white lines on the outside edges of my art work and sometimes the art is perfect. What can I do to fix this problem I have tried flattening the art and that doesn’t work. Please help!

  78. Dede Sabey on December 15th, 2012 12:58 am

    Hi Toya,
    We recommended that you update VersaWorks to the latest version to rule out the software as the source. If the problem persists, it’s likely we’ll have to receive your file for evaluation. Please contact Roland Technical Support to discuss this further. Call 800-542-2307 or email them by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Dede

  79. Jake on December 16th, 2012 3:18 pm

    Problem with my 540v versacamm.
    I was printing a 30″ x 30″ sign on my printer. the design was right but when we printed it on the media the sign was smaller compared to the design about 1/4 – 1/8″ difference. What seems to be the problem.
    Thanks.

    jake

  80. matt on December 18th, 2012 3:33 am

    Hi Dede – quick question — am doing printing w/crop marks – then laminating with a high end heated stretchy 3m laminate – when I try to cut with the cutter the alignment is off as the laminate shrinks the print a bit – have tried using calibration feed setting % ie distance correction – but it seems to have no effect on the cut position – can you tell me why ? (I auto align with the 4 marks and the cut still ends up a bit off) Am using a vs540

    Thanks- Matt

  81. Dede Sabey on December 18th, 2012 10:56 pm

    Hi Jake,
    Based on the description, the issue is likely the result of the printer being out of calibration. Perform the bi-directional and feed alignments on the printer to restore normal operation. Instructions for both adjustments are found in the printer user manual. If you continue to experience issues, please contact Roland Technical Support to discuss this further. Call 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/

    Dede

  82. Dede Sabey on December 19th, 2012 1:02 am

    Hi Matt,
    This is not an easy one to solve in blog comments. Can youy give our Tech Support Department a call? 800-542-2307 or fill out the online form here: http://www.rolanddga.com/owners/support/email/.

    Thanks for reading our blog!

    Dede

  83. Andy on December 28th, 2012 7:24 pm

    Two things happening recently with my VP-300. 1.) Printer is stopping too often to clean. I have always used Roland inks. Usually cleans after it print eh marks after every job and when I turn it on. Temp is around 60 all the time. Humidity is where it should be. Seems to have started on this big 7′ long big graphic. Replacing chips does not work either. i just did firmware update. 2.) Every time I turn it on and now after every clean it tells me to change my wipers – even if I JUST cleaned them. ? Help!!??

  84. acosta on January 4th, 2013 2:06 am

    Hi Andy,

    If your printer is cleaning too frequently, it may be due to an error that’s causing the printer to believe that it’s not using Roland inks. This could be due to a bad chip on your cartridge, bad chip reader on the printer or other electrical issues with the printer.

    It is advised that you contact your local dealer and schedule a service call. If you are not working with a dealer currently, you can locate one by using our Dealer Locator tool at http://www.rolanddga.com/dealers.

    However, if the issue is that the printer cleans every time you turn it on, this is normal behavior and should not require a service call.

    To address the change wiper message, please refer to page 58 of the User’s Manual, which can also be accessed on our website by following this link: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/VP-540_300_USE_EN_R4.pdf

    If you have any further questions or continue to experience issues, please feel free to contact our technical support staff at 800-542-2307 ext. 1.

    Thank you,
    Amber

  85. Mark on January 4th, 2013 9:47 am

    I have a Roland SP-540v
    Was printing fine then started dripping cyan ink. i did the usual clean and then the cyan stopped printing all together. i docked the heads and then tried to draw some ink through the heads with a syringe but there was no compression
    Any ideas?

  86. acosta on January 7th, 2013 9:34 pm

    Hi Mark,

    For a guide that covers nozzle cleaning and restoration, please follow this link: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_PrintCut.pdf.

    If that does not help you to restore the nozzles, we strongly recommend that you call your regional Roland dealer to have the printer inspected and repaired. If you aren’t working with a dealer currently, you can find one by using our Dealer Locator tool at http://www.rolanddga.com/dealers.

    Thank you,
    Amber

  87. Mike on January 9th, 2013 9:10 am

    I have a Roland Sp 540v
    bought it second hand and everything I print even the color charts are coming out spotty.. Not sure how to explain but all colors with the with the exception of black has very tiny dots kind of like half tones?

    Printer nozzle check looks good magenta has a couple missing bars. Black shows a little overspray very tiny.

    Is this suppose to print like this or is there something wrong? Please Help!

  88. Richard Lint on January 9th, 2013 7:01 pm

    SP-540V
    Ive discovered an issue with scale recently
    if my image is exactly 6ft in length.
    final print actually measures 1/2″ over
    and scaling is set at 100%
    Is this normal/whats the accuracy in printing scales of something this size??

  89. Richard Lint on January 10th, 2013 6:40 pm

    and I have performed bi-directioanl and alignments

  90. acosta on January 14th, 2013 9:24 pm

    Hi Mike,

    Based on the description, it sounds like the issue may be related to poor nozzle firing. We recommend that you follow the steps outlined in our test print guide, which is available for viewing online here: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_PrintCut.pdf.

    Additionally, be sure to increase the heat applied to the material. Start at 40 degrees Celsius and increase as needed.

    If you have additional questions, please contact our technical support team to discuss this issue further. Call 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  91. acosta on January 14th, 2013 9:26 pm

    Hi Richard,

    This sounds like a distance alignment issue and can likely be corrected by performing a “Feed” calibration on the printer. We’ve published a guide that illustrates this procedure, which can be accessed here: http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_FeedCal_Rev_1.pdf.

    If the problem persists, please contact Roland Technical Support to discuss further. Call 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  92. John Ingles on January 16th, 2013 1:41 pm

    I have a SP300i when we load a 760mm roll of material and set the all the guides correctly it automatically detects the media width as only 710mm is this normal as i can find no information on this

  93. acosta on January 18th, 2013 1:31 am

    Hi John,

    With any media, you’ll lose 1” – 2” of usable material because of the pinch roller width and position. To maximize the media usage, please ensure that the pinch rollers are positioned correctly. The printer user manual illustrates the optimal settings for pinch rollers. Please refer to that documentation for full details.

    If you continue to experience issues, please contact Roland Technical Support to discuss this further. You can call 800-542-2307 or email us by completing our online form located here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  94. Christopher on January 28th, 2013 10:18 pm

    I am using a SC-540 and I am having issues with the alignment when cutting. Like it looks weighted on a side after printing and then cutting. But the Cutpath is just an offset path around the image. Is there a way that I can align the cutter to follow the path more evenly?

  95. Glenn on January 31st, 2013 3:45 pm

    I’m having issues printing photographic images on white static cling material on a Roland SC-540 with Roland ColoRip software. The ink is forming an orange peel effect across the image. I’ve tried every profile for every substrate with no luck. Any ideas?

  96. Steve Hosmer on February 5th, 2013 10:17 pm

    How often should you clear the queue in VersaWorks?

  97. Steve Masse on February 16th, 2013 6:00 am

    We have had our VS 640 for 2.5 years now. Have printed tons of decals and wraps with it without fail. All of a sudden we are getting way too much saturation of ink ( and it appears to be either the Magenta or Lm). Decals( that are mostly light purple) that we just printed 850 of 2 days ago are now printing a dark purple. And we are using the exact same file and profile. Have even backed ink limit down to -5 and still looks about the same. Test print looks perfect, although looks darker ( more saturated) than I remember it being previously. Quality settings are at Pre Press US. Basically, we changed nothing from 2 days ago until now, but all files are printing differently than they did 2 days ago. Have actually uninstalled VW and reinstalled 4.0 to try that, and still printed same way. And.. to make matters worse.. we then updated it back to 4.8.2 and now the cutline from that same decal file does not show up at all ( not even the symbol in the special items area). There must be some setting that is unchecked or something that is not picking up cutcontour.. Very frustrated. We have done things the same exact way for 2.5 years with this machine and now all of a sudden… no good… And we use only OEM inks that we have bought only from our dealer. I am actually questioning an issue with one of the magenta or Lm cartridges.. as we did swap those out ironically when this problem began…. Any ideas would be greatly appreciated, as we are in a “no printing” status until it is resolved.

  98. Elvin on February 21st, 2013 6:01 am

    Hi

    We are having problems with our Roland SC-545EX, each time we try to print gray ranging from 90% gray to 5% gray, each time it seems that the magenta oversprays. So the gray becomes more of a pinkish colour.

    Thanks

    Elvin

  99. Yolanda on February 22nd, 2013 6:58 am

    My Roland Vp 540 is suddenly printing the colours all over the place.

    Who can I email for assistance? I have pictures to show the error.

  100. Shaun Peach on February 25th, 2013 2:16 am

    Hi,
    I own a SP300-V and i set up the print cut a few weeks back and it was printing and then cutting perfectly but now it is out by about 2mm, i have done all tests on it and tried altering it but it still stays the same and doesn’t seem to adjust as i change the settings such as the feed and scan. What could i do to get this back to how it used to do?
    Much appreciated

  101. Ashish verma on March 2nd, 2013 8:46 am

    Hi !
    I have a roland sj745 ex.
    The machine works fine but yesterday there was a problem while printing . Consider you are printing ONLY black border on a white vinyl . So the print should be total blank with only the black borders.
    The problem is the machine unnecessarily prints cyan colour throughtout the print ( even outside the print area!) whereas the % of cyan colour is only 5 to 10% . And the test print works ok ..
    Please reply about the problem! Thankyou!

  102. Keith on March 2nd, 2013 8:06 pm

    Hi
    I recently bought a SP 540v jus wanted to knoww what is the average cost (in rands) per square metre on ink consumption

  103. Sergio Alegria on March 6th, 2013 10:46 am

    Hi,

    I’m trying to access the haltone definitions, on the VS 640, but I don’t have any material that allows me to do that. How can I accesse the haltone defitions so I can change de lpi in order to produce diferent results on printing?
    best regards
    Sérgio

  104. acosta on March 7th, 2013 9:41 pm

    Hi Christopher,

    This is most commonly a calibration issue. We’ve published a document on print-cut adjustment that can be accessed here:

    http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_PrintCut.pdf

    You can also find instructions on how to calibrate print-cut alignment by making adjustments from the menu on the printer in your user manual:
    http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/SC-540_USE_EN_R3.pdf

    If you continue to experience issues, please contact Roland Technical Support to discuss this further. You can call 800-542-2307 or email us by completing our online form located here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  105. acosta on March 7th, 2013 10:12 pm

    Hi Glenn,

    It sounds like this may need to be custom profiled. We don’t produce profiles for ColoRIP, only for Roland VersaWorks, but you can purchase a profiling package from our online store here: http://www.rolanddgastore.com/product.aspx?zpid=1845.

    If you continue to experience issues, please contact Roland Technical Support to discuss the details further. You can call 800-542-2307 or email us by completing our online form located here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  106. acosta on March 7th, 2013 10:17 pm

    Hi Steve,

    The frequency will depend on your existing computer resources. It’s recommended to clear the queue whenever you begin to see a noticeable difference in the performance of VersaWorks.

    If you would like to discuss this topic further, please contact Roland Technical Support at 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  107. acosta on March 7th, 2013 10:56 pm

    Hi Matt,

    This one isn’t an easy case to solve via blog comments. Our team will likely be able to provide you with more thorough support on this issue if you give us a call at 800-542-2307 or fill out the online form here: http://www.rolanddga.com/owners/support/email/.

    Thanks for reading our blog!
    Amber

  108. acosta on March 7th, 2013 11:12 pm

    Hi Elvin,

    Based on your description, this is likely the result of a profiling issue. Please visit our Roland Academy webinar archive to view a presentation titled “Printing Grey” that may provide some assistance on this topic: http://www.rolanddga.com/webinars.

    If you would like to discuss software options with our technical support team, please give us a call at 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Thank you!
    Amber

  109. acosta on March 7th, 2013 11:17 pm

    Hi Yolanda,

    For more thorough assistance with this issue, please contact your local Roland dealer and/or our technical support team at 800-542-2307. You can also email us by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Thank you for reading Tips & Tricks!
    Amber

  110. acosta on March 7th, 2013 11:24 pm

    Hi Shaun,

    This sounds like it could be a calibration issue. We have created a guide that covers print-cut adjustment that can be accessed here:
    http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/Service_Doc_PrintCut.pdf

    You can also find instructions on how to calibrate print-cut alignment from the menu on the printer in your user manual:
    http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/SC-540_USE_EN_R3.pdf

    If you continue to experience issues, please contact Roland Technical Support to discuss this further. You can call 800-542-2307 or email us by completing our online form located here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  111. VINSON on March 9th, 2013 3:29 pm

    I HAVE A PROBLEM
    ERA 106 KEEPS ON COMING ON MY SCREEN
    WHAT ERA IS IT
    ROLAND VP 540

  112. acosta on March 14th, 2013 8:24 pm

    Hi Ashish,

    In order to provide you with the best answer, we would need to get some more details on the issue. Can you please contact the dealer you purchased the printer from or our technical support team to discuss this further? If you’re in the US, Canada or Latin America, you can call 800-542-2307 or fill out our online form here: http://www.rolanddga.com/owners/support/email/.

    If you are outside of our territory, you can find contact info for a local Roland affiliate here: http://www.rolanddga.com/company/internationalPartners.asp.

    Thank you for reading our blog!
    Amber

  113. acosta on March 14th, 2013 8:38 pm

    Hi Sérgio,

    Halftone definitions can only be accessed within media profiles in which they are enabled. Unfortunately if that is not the case, you will not be able to access halftones using that profile. In order to gain access to halftones, you can either try to find a profile that offers halftones or create your own custom profile.

    Profiling software packages are available for purchase at our online store here: http://www.rolanddgastore.com/product.aspx?zpid=1845.

    If you would like to discuss this topic further, please contact our technical support team at 800-542-2307 or email us by completing our online form here: http://www.rolanddga.com/owners/support/email/. If you are located outside of our territory, you can find contact info for a local Roland affiliate here: http://www.rolanddga.com/company/internationalPartners.asp.

    Thank you,
    Amber

  114. acosta on March 14th, 2013 8:59 pm

    Hi Keith,

    We can refer you to a tool that will calculate the average cost in dollars per square inch but unfortunately, not in rands per square meter. Can you please get in touch with the dealer you purchased your printer from or a local Roland affiliate for assistance? Contact information for all of our international partners can be found here: http://www.rolanddga.com/company/internationalPartners.asp.

    If you would like to inquire with our technical support team, please send us an email by completing our online form here: http://www.rolanddga.com/owners/support/email/.

    Thank you,
    Amber

  115. Rob on March 15th, 2013 3:16 pm

    I have a Roland Vp 540i
    Everything I print even the color charts are coming out spotty.. Not sure how to explain but all colors with the with the exception of black has very tiny dots kind of like half tones?

    Everything has small dots in it.

    I noticed someone named Mike had e-mailed you about a very similar issue on January 9th. You sent a message back saying the issue may be related to poor nozzle firing. You gave him a link to a guide that covers nozzle cleaning and restoration. but the link went to print cut adjustment.

    By doing a print cut adjustment does that correct poor nozzle firing or is there another link to fix the nozzle issue. Thank You!

  116. Trevor on March 27th, 2013 9:56 am

    Hello,
    I have a Mutoh vj1204. I am very new to printing and is very concerned about maintenance. I am leaving town for just over a week. Can this affect my printer? What can i do to ensure everything will be fine upon return?

  117. Matthew on April 3rd, 2013 4:11 pm

    Hello,

    we have 3 Roland RE-640 presses. We have had a couple techs out to install and trouble shoot. We keep having what appears to be dot deflection and nozzle drop out. Press will be runing then next thing we have trails on the end of our image. We are dye subbing after printing which is magnifying the issue. any thoughts other than static or air in our lines that may be casing these issues?

  118. Sports Mad on April 19th, 2013 6:03 am

    Hi
    I have a sp540v and have had it since new about 6 years old now and only get used to print a few metres a week and of late the black prints with a fuzzy edge making the letters look a bit blurry and same with the test print . Is the head going or is there a way to rectify this problem . Any advice will be appreciated Regards Ridge

  119. Pantelis on April 23rd, 2013 11:36 am

    Hello guys, I own a vp-540i and lately the black is becoming more and more purple and is printing with empty lines. Having cleaned the machine very thoroughly and carefully and having syringed the black fibres the problem remains. I also have missing lines when i print sign and display black jobs and in the test print eveything is ok except black which lacks stripes.The technician told me by phone that i need a printhead.Is there anything else I can do?

  120. ASIF QADRI on May 2nd, 2013 1:06 pm

    Hi,
    plz help me i have use re-640 as sublimition works.
    I am faced the problem of most of the nozzles are clogged.Plz helm me and tell me the some trics that i use and head nozzle macke 100% ok . plz mail me i m very thankfull to u.

  121. Denise Baker on May 9th, 2013 9:20 pm

    Love my Roland! Least troublesome printer in my shop!
    I have a Roland HiFi52 and use BK CY MG OR GR YE pigmented inks. What I want to do is print a sign, 36″ or 48″ x 48″ on static cling media with solid black and gold colors, to be put, removable & reusable, on the inside of a vacant building’s window (no back lighting). What media should I be asking for form my suppliers? Any tips on printing?
    If this is not available, how would you recommend me making these signs for my customer?
    Thank You in advance,
    Denise

  122. alejandro on June 6th, 2013 11:02 am

    Me aparece en la pantalla de una SP540V : Temperature is too low.
    ¿qué debo hacer?

  123. Ramzi A. Hodali on June 13th, 2013 4:05 am

    can you help me in solving one of the most annoying thing.

    my roland 540 keeps cleaning while printing every 20 cm i loose much ink for nothing. in all printings sent to the printer it cleans around 4 times per print

    please help

  124. Oliver on June 13th, 2013 8:36 am

    Am experiencing a problem with my Roland XJ 740 Printer. Its with the print quality. There are horizontal light stripes appearing and it keeps on losing the colour. I tried to adjust the calibration but the problem has persisted. Previously we were using -0.3% but even after adjusting to -0.6 or -0.8% still there is no difference. How can I go about that problem.

  125. saqib on June 17th, 2013 3:53 pm

    Hey!

    I have roland re 640 . iam using this printer last 7 month now i have problem in printing . when i print its head leave lining that looks miner but when i heat the papers bold black lines come on the fabric any body can help me how can i solve my problem ?

    Please help iam in truble

  126. acosta on June 18th, 2013 10:00 pm

    Hi Vinson,

    Thank you for checking out Tips & Tricks. We may have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.
    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can also reach us by phone at 800-542-2307.

    We hope this helps!

    -Amber

  127. acosta on June 18th, 2013 10:08 pm

    Hi Rob,

    Thank you for your interest in Tips & Tricks. In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.
    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can also reach us by phone at 800-542-2307.

    We hope this helps!

    -Amber

  128. acosta on June 18th, 2013 10:29 pm

    Hi Trevor,

    I apologize, but we are only able to offer support for Roland products. If you have questions regarding that device, we would recommend that you contact the company directly. Thank you for visiting Tips & Tricks!

    -Amber

  129. acosta on June 18th, 2013 10:33 pm

    Hi Matthew,

    Thanks for checking out Tips & Tricks. In order to best diagnose the issue, we recommend that you contact our support team.
    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can reach us by phone at 800-542-2307.

    We hope this helps!

    -Amber

  130. acosta on June 18th, 2013 10:46 pm

    Hello,

    Thank you for checking out Tips & Tricks! In order to best diagnose the issue, we recommend that you get in touch with our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this is helpful!

    -Amber

  131. acosta on June 18th, 2013 10:48 pm

    Hi Pantelis,

    That’s an excellent question. We may have an answer for that on our support webpage: http://www.rolanddga.com/owners/support/.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can also reach us by phone at 800-542-2307.

    We hope this helps. Thank you for reading Tips & Tricks!

    -Amber

  132. acosta on June 18th, 2013 11:02 pm

    Hi Asif,

    Thank you for reading Tips & Tricks. In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can reach us by phone at 800-542-2307.

    If you are located outside of our territory, you can find contact info for a local Roland affiliate here: http://www.rolanddga.com/company/internationalPartners.asp.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Amber

  133. acosta on June 18th, 2013 11:09 pm

    Hi Denise,

    Thank you for your interest in Tips & Tricks! We’re glad to hear that you love your Roland.

    That’s an excellent question and we may have an answer on our support webpage: http://www.rolanddga.com/owners/support/.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can also reach us by phone at 800-542-2307.

    We hope this information is helpful. Thanks for again for reading!

    -Amber

  134. acosta on June 18th, 2013 11:26 pm

    Hi Alejandro,

    Thank you for reading Tips & Tricks. In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer assistance from a Roland Product Support Specialist, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Amber

  135. acosta on June 18th, 2013 11:30 pm

    Hi Ramzi,

    Thank you for your inquiry. We may have an answer for that on our support webpage: http://www.rolanddga.com/owners/support/.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can also reach us by phone at 800-542-2307.

    If you are located outside of our territory, you can find contact info for a local Roland affiliate here: http://www.rolanddga.com/company/internationalPartners.asp.

    We hope you find this information helpful. Thank you for your interest in Tips & Tricks!

    -Amber

  136. acosta on June 18th, 2013 11:45 pm

    Hi Oliver,

    Thank you for reading our Tips & Tricks blog. In order to best diagnose the issue, we recommend that you contact our support team or a local Roland dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question at our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this is helpful!

    -Amber

  137. acosta on June 18th, 2013 11:50 pm

    Hi Saqib,

    Thank you for your interest in Tips & Tricks. In order to best diagnose the issue, we recommend that you get in tough with our support team or a local dealer.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.
    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this information is helpful to you!

    -Amber

  138. Bonney on July 28th, 2013 12:02 am

    Hi,
    I am having a problem with my AJ1000i. The lt cyan head was printing only half head. I changed a new head and same problem. I try switching flat cable, but same problem. Can anyone help? Thank you.
    Bonney.

  139. Bonney on July 28th, 2013 12:11 am

    Bonney49@gmail.com
    Caribbean

  140. Steve on July 30th, 2013 10:47 am

    Hi,can u raise the head on the sp300 for printing on thick canvas.

  141. Shaina Shieh on August 9th, 2013 5:35 pm

    Bonney,

    We are sorry to hear about these difficulties! In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  142. Shaina Shieh on August 9th, 2013 5:42 pm

    Hi Steve,

    Thank you for your inquiry, we are happy to answer it. We recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  143. jasminder Singh on August 15th, 2013 6:18 am

    Hi, I am planning to buy Roland Print and cut machine for large size prints on Cotton Tshirts.My concern is how to have a softer feel in print.The print cut gives the paper feel and in India, these days people like Tshirts with softer feel prints.Would appreciate a prompt response.

    Regards

    Jasminder Singh

  144. Tony Martello on August 17th, 2013 12:53 am

    While I was printing on my Roland SP540i, a message came up saying the cartridges are separated…any ideas how to fit it?

  145. matt on August 19th, 2013 5:30 am

    Hi – My vs-540 cleans itself every 12 hrs or so when the machine is off. I have tried in the settings to eliminate this cleaning but am unable do so. Is there a way to disable this seeming automated function ??

  146. Andrew on August 22nd, 2013 6:41 am

    Hi, I have a Roland VS-540 CMYK.
    When I print the color red on Avery MPI 3000PP vinyl the red is grainy.
    I have requested the media profile from Avery, but have had no luck.
    I have tried using the MPI 3000 profile and the generic profiles within versaworks.

    Do you have any suggestions?

  147. Md. Zaki on August 24th, 2013 4:06 am

    hi there, im having my problem to my Roland Printer SJ-740, i can’t print the normal color of magenta on my printer, but every time i make a test print, the print head can print the magenta color, wonder why when i print some of our projects involving magenta color comes out in a different color, Example the red the output is light orange the same thing with the color maroon, i hope you can help me with this,

    thank you

  148. Shaina Shieh on August 26th, 2013 9:29 pm

    Dear Zaki,

    We would love to help you out with that! We recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  149. Shaina Shieh on August 26th, 2013 9:38 pm

    Hi Andrew,

    We’d love to give you some suggestions. We recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  150. Shaina Shieh on August 26th, 2013 9:47 pm

    Hi Matt,

    When the printer has been idle for a while, it goes into a soft shut down. Every now and then, the printer exercises the printhead and jets a few drops of ink (cleaning the machine). This keeps the printheads functional after periods of non use, without wasting a lot of ink.

    If you have any more questions and concerns about this matter, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  151. Jeff Spence on August 28th, 2013 10:45 pm

    I’m having a problem with my XC-540. When ever I print type out(Grey or Black) I get a cyan hazy over spray out the letter’s. Any advice how to get rid of it?

  152. Rhiannon Coffin on August 29th, 2013 2:38 am

    Hi,
    I have a roland sp540v 54inch large format printer. I recently purchased it secondhand and it is about 8 years old. I am using window 8 on my HP computer that runs the printing.
    It has been printing fine with no problems, (except the occasional heat marks),
    but last night the internet wasn’t working on my computer and a ‘HP diognostic check’ came up to solve the problem. It then said that it had ‘reset the ethernet adapter’ (while I was printing),
    this then caused the print to stop half way though and wouldn’t start up again….
    Now when I press print on Versaworks the file goes up into the printing status queue, the computer does it’s thinking for a while, then it removes itself from the queue.
    There is no warning on the computer or printer screens, it just isn’t printing. It’s like the computer isn’t talking to my printer now.
    Can you give me any ideas on what to check out to solve this please?
    (The ip,subnet mask and default gateway numbers are still correct).
    Thanks.

  153. Rhiannon Coffin on August 29th, 2013 3:45 am

    Hi Again, My service guy has just got back to me and we have solved the problem! I turned off the printer (at the switch on the side as well as the front, turned off my computer, then turned my computer back on. Once completely started up I then turned on my printer at both switches. This has fixed the connection problem….But I would like some general advice on heat marks if possible please? Thanks…

  154. chris miller on August 29th, 2013 4:42 pm

    Can anyone tell me how to change the head manafold on a versaqcamm 540 Thank you so much

  155. Birendra shah on September 2nd, 2013 4:39 pm

    Hi! .This year I bought three machine from Epsom India .One is LEJ 640 ,second is RA 640 and third is GX-500.We have many more branded photo printing machine and my problem is due to expensive of LEJ 640 ink ,we have no jobs to print.So kindly advice us how I can get little cheaper inks?

  156. Laith on September 19th, 2013 9:30 am

    Hi guys, can anyone help me please to solve my problem. I have SP540V and the problem is I always get colours way darker than the actual colours, specially if I print photos or pdf files.

    Any suggestions please.

    Thanks

  157. tedd on September 19th, 2013 8:23 pm

    Hi. I have an old Roland CS 500 when doing a test print the black has many lines missing the demo print the black is bad also. I changed the capping station and the pump but it did not help. Do you think the head is gone?

  158. Bob on September 20th, 2013 1:12 am

    We have an SP300. We have never been able to print vibrant photos. All our photos look like they were taken at dusk. The tech suggested that we use Roland inks and media. Do we need to completely flush the old inks from the system, or can we replace the inks as the old ones are used up?

  159. mike on September 22nd, 2013 6:49 am

    I have a sp300 v and it says it to cold no matter the temp in the room

  160. Shaina Shieh on September 23rd, 2013 4:30 pm

    Dear Jasminder,

    At this time, we do not have any official means of changing the feel of the HTM. If you have anymore inquiries, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We hope this helps!

    Shaina

  161. Shaina Shieh on September 23rd, 2013 5:24 pm

    Dear Jeff,

    We would like to help you fix this problem immediately! We recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  162. Shaina Shieh on September 23rd, 2013 5:25 pm

    Dear Rhiannon,

    To give you ideas on how to solve this problem, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  163. Shaina Shieh on September 23rd, 2013 5:28 pm

    Dear Rhiannon,

    We are so happy that your technician was able to solve the issue! For more general advide on heat marks you may contact us by phone at 800-542-2307.

    Happy printing!
    -Shaina

  164. Shaina Shieh on September 23rd, 2013 5:31 pm

    Dear Chris,

    We recommend that you have a certified Roland dealer make official repairs on your machine.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!

    -Shaina

  165. Shaina Shieh on September 23rd, 2013 5:36 pm

    Dear Birendra,

    For the best prints on a Roland printer we recommend you use our line of Roland inks that can be found at http://www.rolanddga.com/products/inks/.

    We hope this helps!
    -Shaina

  166. Shaina Shieh on September 23rd, 2013 5:44 pm

    Dear Laith,

    We want to help you solve your problem! We recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!
    -Shaina

  167. Shaina Shieh on September 23rd, 2013 5:46 pm

    Dear Tedd,

    We would like to answer your inquiry. We recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!
    -Shaina

  168. Shaina Shieh on September 23rd, 2013 5:47 pm

    Dear Mike,

    Thank you for your comment! We recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!
    -Shaina

  169. Shaina Shieh on September 23rd, 2013 5:48 pm

    Dear Bob,

    For this inquiry, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    You can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    We hope this helps!
    -Shaina

  170. Neil Britt on September 27th, 2013 8:46 pm

    I have owned and operated my SC 540 since 2004 – wonder of a machine – really! In all those years I have seen much, fixed very little, but I have never seen the message “replace wipers” (which I do fairly regularly). So I did. Now how do yo tell the machine I have done the deed? The message appears every time I wake the machine. If it is a secrete code, I promise I won’t tell, anyone- who doesn’t read your “blog.”

    Thanks,
    nb

  171. Shell on October 4th, 2013 8:10 pm

    Been experiencing problems where our printer (SP540i) is barely printing (test print) Magenta and Yellow and no Cyan and Black. Desperate for some help. We have tried numerous cleaning powerful, medium and normal at least more than 4 times and replaced the wipers as well.

  172. Matthew on October 14th, 2013 12:29 pm

    My prints have become blurry. I have cleaned the plastic strip and just about everything else.
    I have a Roland SP-540V
    Any advise?

  173. Kris on October 16th, 2013 10:46 pm

    I’ve Roland vs-640 machine, double CMYK mode, started print with missing dots, called tech guy, replaced dampers,caping . Shortly after that missing dots showed again, very weird, after cleaning getting worse, if I leave printer for few hours test print is perfect, after about 30cm of printing missing dots are up again, cleaning just make thinks worse and changing missing dots pattern. Affected mainly left site, very bad magenta,yellow Slightly better, other colours are better,not perfect, changing missing dots pattern every time.

  174. Sheldon on October 23rd, 2013 6:21 pm

    Need help flushing the system on my SCS454EX printer. I put a black cartridge in the magenta slot and ran a few prints and the colors are way off. I was told I can syringe the black ink out of the magenta tube to fix the problem. Any help is greatly appreciated. Thanks.

  175. Alberto Estanislao on October 28th, 2013 10:58 pm

    I got a Roland FJ 400 8 colour printer. The problem is, every time I do a test print, magenta print as black. I’ve clean the head several times but don’t solve the problem. All colours prints OK except magenta. Please help.

  176. Cathey on November 12th, 2013 4:34 am

    Hi there we have a new Roland BN-20 and have been working well with it for the last 2 weeks printing and then cutting. But today we’ve have had 2 files just stop mid printing. The printer seems to be ‘hanging’at 96% print status. Any idea’s? Thanks

  177. Birendra shah on November 23rd, 2013 4:55 pm

    Please suggest how to fix the pinch roller marks on forex board or sun board printing.Can I upgrade LEJ 640 to LEJ 640 F.And how much it cost?

  178. Paul McKee on December 18th, 2013 3:36 pm

    We are new to Roland and wide format printing. We have recently purchased a new 540i and are very pleased with it. We use it mostly for printing tiny (.25 x .50 inch) labels on vinyl. Recently we tried printing on 12 mil (.40mm) PVC stock (54 inch roll) and have run into difficulties getting it to lay perfectly flat. We use the media guides and all the friction rollers, 100% vacuum. It looks flat to the eye, but when printing with the head in the lower position, it prints clearly but the head apparently contacts the media in areas leaving black marks. If we run the head in the high position, it eliminates the scuffs but areas of the print appear blurred…presumably the high areas where it isn’t flat. Do you have any tips or suggestions for printing this stock? Thanks in advance.

  179. acosta on December 27th, 2013 10:40 pm

    Hi Tony,

    Thank you for your interest in Tips & Tricks. In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    We may also have an answer for your question on our support webpage: http://www.rolanddga.com/owners/support/.

    I hope this is helpful!

    -Amber

  180. acosta on December 27th, 2013 10:54 pm

    Hi Matthew,

    Based on the details you provided, we recommend that you contact our support team or a local dealer in order to best diagnose the cause.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact information at http://www.rolanddga.com/owners/support/email/. You can also reach us by phone at 800-542-2307.

    I hope this helps. Thank you for reading Tips & Tricks!

    -Amber

  181. acosta on December 27th, 2013 11:20 pm

    Hello Shell,

    In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. You can also reach us by phone at 800-542-2307.

    Thank you for reading Tips & Tricks!

    -Amber

  182. acosta on December 27th, 2013 11:32 pm

    Hi Neil,

    Thank you for your interest in Tips & Tricks. In order to best diagnose the cause, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact information at http://www.rolanddga.com/owners/support/email/. You can also reach us by phone at 800-542-2307.

    I hope this is helpful!

    -Amber

  183. acosta on December 27th, 2013 11:37 pm

    Hi Kris,

    Thank you for reading Tips & Tricks. If you’re located in North or South America and would like the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/.

    If you are located outside of our territory, you can find contact info for a local Roland affiliate here: http://www.rolanddga.com/company/internationalPartners.asp.

    I hope this helps. Thank you for reading Tips & Tricks!

    -Amber

  184. acosta on December 27th, 2013 11:56 pm

    Hi Sheldon,

    Based on the details you provided, we recommend that you contact our support team or a local dealer to provide you with the best support.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. You can also reach us by phone at 800-542-2307.

    I hope this is helpful. Thank you for reading Tips & Tricks!

    -Amber

  185. acosta on December 28th, 2013 12:10 am

    Hi Alberto,

    Based on the details you provided, we recommend that you contact our support team or a local dealer in order to best diagnose the cause.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. You can also reach us by phone at 800-542-2307.

    I hope this is helpful. Thank you for reading Tips & Tricks!

    -Amber

  186. acosta on December 28th, 2013 12:44 am

    Hi Cathey,

    Thank you for you for reading Tips & Tricks. In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact information at http://www.rolanddga.com/owners/support/email/. Or you can also reach us by phone at 800-542-2307.

    I hope we can help you resolve this issue!

    -Amber

  187. acosta on December 28th, 2013 1:02 am

    Hi Paul,

    Thank you for you for reading Tips & Tricks. For assistance with this inquiry, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. Or you can reach us by phone at 800-542-2307.

    I hope this helps!

    -Amber

  188. evelyn on February 12th, 2014 2:18 am

    Hi, we have a roland printer sj 740, our problem is when we print a jpeg image with Brown or gold color, the output is greenish…We already do cleaning and the test print is complete

  189. Sabrina on February 13th, 2014 6:06 pm

    I have VersaCamm 540V and when cutting through Onyx, every once and a while the cutter won’t cut the top part of the decal.

    What is the possible problem?

  190. Mahmoud on February 19th, 2014 10:10 pm

    Dear Mr
    hi
    i have versa camm vp 540 and when i tried to print with crop marks on the max wedth of printing the head is stoped when the reach to the other media side and after that i decrease the media wdth to 75 cm and the heads soped after printing 60 cm .
    may you advice me to resolve this proplem

  191. Oscar on February 27th, 2014 7:20 am

    hi there we having a problem with calibration we got roland versacamm RS-640v the problem i am having ryt now its. the media its self its not moving out of the place but the machine its not printing straight on the media and i have tried to set the calibration but still its not coming straight.Also for print and cut jobs when printing its deleting the jobs before it finishes printing. so i dont know hot to get the print nice and crisp pls if u can help me out wid my solution?? thanx

  192. Ray on March 4th, 2014 5:15 pm

    Hi,
    I recently purchased a used SC540. It needs a main board. Can you give me an idea as to what allis involved in this? Thank for any insight you can provide.

    regards,
    Ray

  193. Susan on March 5th, 2014 12:45 am

    Hi,
    We love our Roland Versacamm 540v. We purchased it second-hand and it’s been a real workhorse these past few years. Can you help me with this new printing issue? It prints perfectly, except several inches into a print job it starts printing grainy for about an inch all the way across, and then goes right back to perfect printing again for the rest of the job. What could be causing this? I use the printer several times a week on the same media and haven’t changed settings. The test prints are perfect. I’d greatly appreciate any help you can give!

  194. Jake on March 12th, 2014 3:02 pm

    We have an SC-540 and the feed calibration is un-even from one side to the other. When printing at the full media width, one side(left) will have banding while the capping side(right) will print great. Any thoughts? Thanks.

  195. Dennis Richards on March 16th, 2014 9:16 pm

    i have a pc60 and i can’t access the printer menu it allows me to cut but not to print….i am wondering if it is the key for the software is bad…initially i was having problems with line when printing but it is not allowing to read from the print menu (not been able to use the print menu) that’s for you help in advance…would really like to get it working again

    Dennis

  196. Rena on March 28th, 2014 6:49 pm

    Hello, ihave sp540v and i have a printing problem. In all kinds of printing in all materials the printer starting good, after 10cm the color fade away (becoming white)then become the right color again, after 10 cm becomes slowly white and then back again and etc. I watch the machine like my eyes from the moment i bought that. The support here tells me to change the heads but i’m sure that it is not the solution because if it was problem of the heads it would be the same in all the printing and not like mine printing. I must also tell you that roland here told me to buy acro colors and that its the same thing like roland colors. I’m not sure about that because the problems started after i used that colors. if you want i can sent you a photo of the printing in your e-mail so you can understand better. I must say also that the problem is more in raster colors (50% of each color). Please help me.

    Regards
    Rena

  197. acosta on April 11th, 2014 10:54 pm

    Hi Evelyn,

    We may have an answer for that on our support webpage: http://support.rolanddga.com/_layouts/RolandDGA/productdetail.aspx?pm=SJ-740.

    If you’re located in North or South America and would prefer to speak with one of our Product Support Specialists, please send us an email with your contact information at http://www.rolanddga.com/owners/support/email/.

    I hope this is helpful. Thank you for reading Tips & Tricks!

    -Amber

  198. acosta on April 11th, 2014 10:59 pm

    Hi Sabrina,

    Thank you for reading Tips & Tricks. In order to best diagnose this issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. Or you can reach us by phone at 800-542-2307.

    I hope this helps!

    -Amber

  199. acosta on April 11th, 2014 11:02 pm

    Hi Mahmoud,

    For better assistance and help with troubleshooting this issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with the details at http://www.rolanddga.com/owners/support/email/.

    We may also have an answer for your question on our support page: http://www.rolanddga.com/owners/support/.

    I hope this helps. Thank you for reading Tips & Tricks!

    -Amber

  200. acosta on April 11th, 2014 11:20 pm

    Hi Oscar,

    We may have an answer for that on our support webpage: http://support.rolanddga.com/_layouts/RolandDGA/productdetail.aspx?pm=RS-640

    If you’re located in North or South America, please send us an email with your contact information at http://www.rolanddga.com/owners/support/email/.

    If you are outside of our territory, you can find contact info for a local Roland affiliate here: http://www.rolanddga.com/company/internationalPartners.asp.

    I hope this is helpful. Thank you for reading Tips & Tricks!

    -Amber

  201. acosta on April 11th, 2014 11:23 pm

    Hi Ray,

    For assistance with this inquiry, we recommend that you contact a local dealer. If you are not already in touch with an authorized Roland re-seller, you can locate one nearest to you here: http://www.rolanddga.com/dealers/

    If you’re located in North or South America and would prefer the help of one of our Product Support Specialists, please send us an email with your contact information at http://www.rolanddga.com/owners/support/email/. Or you can reach us by phone at 800-542-2307.

    I hope this helps. Thank you for reading Tips & Tricks!

    -Amber

  202. acosta on April 11th, 2014 11:32 pm

    Hi Susan,

    Based on the details you provided, we recommend that you contact our support team or a local dealer in order to best diagnose the cause.

    If you’re located in North or South America, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. You can also reach us by phone at 800-542-2307.

    I hope this is helpful. Thank you for reading Tips & Tricks!

    -Amber

  203. acosta on April 11th, 2014 11:33 pm

    Hi Jake,

    Thank you for checking out our Tips & Tricks blog. In order to best diagnose this issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would like assistance from one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. You can also reach us by phone at 800-542-2307.

    I hope this is helpful!

    -Amber

  204. acosta on April 11th, 2014 11:41 pm

    Hi Dennis,

    Thank you for checking out our Tips & Tricks blog. For assistance with your inquiry, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would like to speak with one of our Product Support Specialists, please send us an email with your contact info at http://www.rolanddga.com/owners/support/email/. Or you can reach us by phone at 800-542-2307.

    I hope this helps!

    -Amber

  205. acosta on April 11th, 2014 11:43 pm

    Hi Rena,

    Thank you for reading Tips & Tricks. In order to best diagnose the issue, we recommend that you contact our support team or a local dealer.

    If you’re located in North or South America and would prefer direct assistance from one of our Product Support Specialists, please send us an email with the details at http://www.rolanddga.com/owners/support/email/. Or you can reach us by phone at 800-542-2307.

    We may also have an answer for your question on our support webpage: http://support.rolanddga.com/_layouts/RolandDGA/productdetail.aspx?pm=SP-540V

    I hope this helps!

    -Amber

  206. saqib on June 28th, 2014 6:13 am

    Dear sir
    I have got Roland RE640 printer .I am using it last on year Before six it was going well after six months i have continued problem in my Printer head its all chenille or working but only one dot is on magenta color is missing butt during my printing printer left line on printing . I have clean all dumper of head also pipe of magenta color butt problems is tell . I have spent allot of money for maintenance . Please can any body tell me is soled solution. please help me
    Email saqib.art@gmail.com
    Saqib .

Leave a Reply




Roland DGA, Corp.